今年会jnh

　　CC系列圆锥破碎机是南昌矿机引进国际先进技术和钻研成就，成功研发的新一代产品。宽泛利用于各类最僵硬和高磨蚀性矿物岩的破碎作业。

　　产品特点

　　1.传动齿轮

　　大幼螺旋锥齿轮，可实现大扭矩和高能效传动。

　　2.可调偏疼距

　　偏疼村套，偏疼套两者组合，通过键装置在偏疼衬套分歧的键槽中可等闲实现多个偏疼距设定，以适应分歧矿石和工况的要求，从而实现挤满仓给料。

　　3.曲线破碎腔

　　凭据物料层压破碎道理和腔壁磨损个性，腔型设计为曲线，能确保破碎机产量大、产品质量高、磨损成本低的指标。

　　4.过载；は低

　　通过液压、电气共同；ぶ骰，尽可能降低过载时对主机的危险。

　　5.AutoRun自动节造系统

　　能实显炱碎作业过载；ぁ⒐；ぁ⒊陌迥ニ鹱远獬サ，通过挤满仓给料，能使破碎机功效阐扬到最大。

　　6.靠得住的液压光滑系统

　　光滑系统、液压系统按
？榛杓，各自独立运行，通过与主电机联锁，可实规油温、流量、压力、功率、异常电源等；。

点击查看原图

　　CC cone crusher is successfully developed by NMS through introduction of foreign advanced technology and research findings. It is widely used invarious hard and abrasive rocks.

　　Features

　　1.Transmission gear

　　Bevel and pinion gears can keep the crusher with big torque and high efficient transmission。

　　2.Eccentric setup

　　To meet the requirement of different mining applications, combination of main shaft， eccentric bushing and eccentric sleeves are easily adjusted.

　　3.Curved crusher chamber

　　According to the principle of lamination crushing and the feature of chamber wall wearing， the shape of cone crusher chamber is designed as curve, so as to obtain larger productivity，high quality and less wearing cost.

　　4.Overload protection system

　　The damage caused by overloading can be reduced through hydraulic and electrical protection system.

　　5.Auto Run auto operation system

　　Overload protection, tramp iron protection, wearing plate auto compensation and choke feeding makes the efficiency of the cone crusher up to maximum.

　　6.Modern reliable hydraulic lubrication system

　　The lubricating system and hydraulic system are designed according to the modularity and operate independently. The system cooperates with the main motor, oil temperature, flow, pressure, power, abnormal power supply and other protection can be achieved.